Isolation and characterization of cellulase producing bacteria from forest, cow dung, Dashen brewery and agro-industrial waste.

The continuous accumulation of waste, particularly from industries, often ends up in landfills. However, this waste can be transformed into a valuable resource through innovative methods. This process not only reduces environmental pollution but also generates additional useful products. This study aims to screen novel high-efficiency cellulose-degrading bacteria from cow dung, forest soil, brewery waste, and agro-industrial waste in the Debre Berhan area for the treatment of cellulose-rich agricultural waste. The serial dilution and pour plate method was used to screen for cellulolytic bacteria and further characterized using morphological and biochemical methods. From eleven isolates cow dung 1 (CD1), cow dung 6 (CD6) and cow dung (CD3) which produced the largest cellulolytic index (3.1, 2.9 and 2.87) were selected. Samples from forest soil, and spent grain didn't form a zone of clearance, and effluent treatment and industrial waste (IW9) shows the smallest cellulolytic index. Three potential isolates were then tested for cellulolytic activity, with cow dung 1 (CD1) displaying promising cellulase activity. These bacterial isolates were then identified as Bacillus species, which were isolated from cow dung 1 (CD1) with maximum cellulase production. Cow dung waste is a rich source of cellulase-producing bacteria, which can be valuable and innovative enzymes for converting lignocellulosic waste.

Simultaneously efficient dissolution and structural modification of chrysanthemum pectin: Targeting at proliferation of Bacteroides.

Pectic polysaccharide is a bioactive ingredient in Chrysanthemum morifolium Ramat. 'Hangbaiju' (CMH), but the high proportion of HG domain limited its use as a prebiotic. In this study, hot water, cellulase-assisted, medium-temperature alkali, and deep eutectic solvent extraction strategies were firstly used to extract pectin from CMH (CMHP). CMHP obtained by cellulase-assisted extraction had high purity and strong ability to promote the proliferation of Bacteroides and mixed probiotics. However, 4 extraction strategies led to general high proportion of HG domain in CMHPs. To further enhance the dissolution and prebiotic potential of CMHP, pectinase was used alone and combined with cellulase. The key factor for the optimal extraction was enzymolysis by cellulase and pectinase in a mass ratio of 3:1 at 1 % (w/w) dosage. The optimal CMHP had high yield (15.15 %), high content of total sugar, and Bacteroides proliferative activity superior to inulin, which was probably due to the cooperation of complex enzyme on the destruction of cell wall and pectin structural modification for raised RG-I domain (80.30 %) with relatively high degree of branching and moderate HG domain. This study provided a green strategy for extraction of RG-I enriched prebiotic pectin from plants.

Bacterial cellulose nanocrystals obtained through enzymatic and acidic routes: A comparative study of their main properties and in vitro biological responses.

Cellulose nanocrystals (CNCs) are crystalline domains isolated from cellulosic fibers. They have been utilized in a wide range of applications, such as reinforcing fillers, antibacterial agents and manufacturing of biosensors. Whitin this context, the aim of this work was to obtain and analyze CNCs extracted from bacterial nanocellulose (BNC) using two distinct methods combined with milling pre-treatment: an acidic hydrolysis using 64 % sulfuric acid and an enzymatic hydrolysis using a commercial cellulase enzyme mixture. The CNCs obtained from the enzymatic route (e-CNCs) were observed to be spherical nanoparticles with diameter of 56 ± 11 nm. In contrast, the CNCs from the acid hydrolysis (a-CNCs) appeared as needle-shaped nanoparticles with a high aspect ratio with lengths/widths of 158 ± 64 nm/11 ± 2 nm. The surface zeta potential (ZP) of the a-CNCs was -30,8 mV, whereas the e-CNCs has a potential of +2.70 ± 3.32 mV, indicating that a-CNCs consisted of negatively charged particles with higher stability in solution. Although the acidic route resulted in nanocrystals with a slightly higher crystallinity index compared to the enzymatic route, e-CNCs was found to be more thermally stable than BNC and a-CNCs. Here, we also confirmed the safety of a-CNCs and e-CNCs using L929 cell line. Lastly, this article describes two different CNCs synthesis approaches that leads to the formation of nanoparticles with different dimensions, morphology and unique physicochemical properties. To the best of our knowledge, this is the first study to yield spherical nanoparticles as a result of BNC enzymatic treatment.

Efficient extraction of lignin from moso bamboo by microwave-assisted ternary deep eutectic solvent pretreatment for enhanced enzymatic hydrolysis.

Applications of deep eutectic solvent (DES) systems to separate lignocellulosic components are of interest to develop environmentally friendly processes and achieve efficient utilization of biomass. To enhance the performance of a binary neutral DES (glycerol:guanidine hydrochloride), various Lewis acids (e.g., AlCl3·6H2O, FeCl3·6H2O, etc.) were introduced to synthesize a series of ternary DES systems; these were coupled with microwave heating and applied to moso bamboo. Among the ternary DES systems evaluated, the FeCl3-based DES effectively removed lignin (81.17%) and xylan (85.42%), significantly improving enzymatic digestibility of the residual glucan and xylan (90.15% and 99.51%, respectively). Furthermore, 50.74% of the lignin, with high purity and a well-preserved structure, was recovered. A recyclability experiment showed that the pretreatment performance of the FeCl3-based DES was still basically maintained after five cycles. Overall, the microwave-assisted ternary DES pretreatment approach proposed in this study appears to be a promising option for sustainable biorefinery operations.

Influences of superfine-grinding and enzymolysis separately assisted with carboxymethylation and acetylation on the in vitro hypoglycemic and antioxidant activities of oil palm kernel expeller fibre.

The synergistic effects of ultrafine grinding and enzymolysis (cellulase and Laccase hydrolysis) alone or combined with carboxymethylation or acetylation on the hypoglycemic and antioxidant activities of oil palm kernel fibre (OPKEF) were studied for the first time. After these synergistic modifications, the microstructure of OPKEF became more porous, and its soluble fibre and total polyphenols contents, and surface area were all improved (P < 0.05). Superfine-grinding and enzymolysis combined with carboxymethylation treated OPKEF exhibited the highest viscosity (13.9 mPa∙s), inhibition ability to glucose diffusion (38.18%), and water-expansion volume (3.58 mL∙g-1). OPKEF treated with superfine-grinding and enzymolysis combined with acetylation showed the highest surface hydrophobicity (50.93) and glucose adsorption capacity (4.53 µmol∙g-1), but a lower α-amylase-inhibition ability. Moreover, OPKEF modified by superfine-grinding and enzymolysis had the highest inhibiting activity against α-amylase (25.78%). Additionally, superfine-grinding and enzymolysis combined with carboxymethylation or acetylation both improved the content and antioxidant activity of OPEKF's bounding polyphenols (P < 0.05).

Enhancement of cellulolytic enzyme production from intrageneric protoplast fusion of Aspergillus species and evaluating the hydrolysate scavenging activity.

BACKGROUND: Lignocellulosic biomass provides a great starting point for the production of energy, chemicals, and fuels. The major component of lignocellulosic biomass is cellulose, the employment of highly effective enzymatic cocktails, which can be produced by a variety of microorganisms including species of the genus Aspergillus, is necessary for its utilization in a more productive manner. In this regard, molecular biology techniques should be utilized to promote the economics of enzyme production, whereas strategies like protoplast fusion could be employed to improve the efficacy of the hydrolytic process. RESULTS: The current study focuses on cellulase production in Aspergillus species using intrageneric protoplast fusion, statistical optimization of growth parameters, and determination of antioxidant activity of fermentation hydrolysate. Protoplast fusion was conducted between A. flavus X A. terreus (PFFT), A. nidulans X A. tamarii (PFNT) and A. oryzae X A. tubingensis (PFOT), and the resultant fusant PFNT revealed higher activity level compared with the other fusants. Thus, this study aimed to optimize lignocellulosic wastes-based medium for cellulase production by Aspergillus spp. fusant (PFNT) and studying the antioxidant effect of fermentation hydrolysate. The experimental strategy Plackett-Burman (PBD) was used to assess how culture conditions affected cellulase output, the best level of the three major variables namely, SCB, pH, and incubation temperature were then determined using Box-Behnken design (BBD). Consequently, by utilizing an optimized medium instead of a basal medium, cellulase activity increased from 3.11 U/ml to 7.689 U/ml CMCase. The following medium composition was thought to be ideal based on this optimization: sugarcane bagasse (SCB), 6.82 gm; wheat bran (WB), 4; Moisture, 80%; pH, 4; inoculum size, (3 × 106 spores/ml); and incubation Temp. 31.8 °C for 4 days and the fermentation hydrolysate has 28.13% scavenging activities. CONCLUSION: The results obtained in this study demonstrated the significant activity of the selected fusant and the higher sugar yield from cellulose hydrolysis over its parental strains, suggesting the possibility of enhancing cellulase activity by protoplast fusion using an experimental strategy and the fermentation hydrolysate showed antioxidant activity.

Investigation of the effect of enzymatic and alkali treatments on the physico-chemical properties of Sambucus ebulus L. plant fiber.

The investigation aims to determine the effect of enzymatic and alkali treatments on Sambucus ebulus L. stem fiber. For this purpose, Sambucus ebulus L. stem fibers were treated with alkali, cellulase, and pectinase enzymes. An image processing technique was developed and implemented to calculate the average thicknesses of Sambucus ebulus L. fibers. The thickness of alkali, cellulase and pectinase enzyme treated fibers was determined as 478.62 µm, 808.28 µm and 478.20 µm, respectively. Scanning electron microscopy analysis illustrated that enzymatic and alkali treatments lead to the breakage of fiber structure. Furthermore, enzymatic and alkali treatments induce variations in elemental ingredients. All treatments increased the crystallinity index of Sambucus ebulus L. fiber from 72 % (raw fiber) to 83 % (alkali treated), 75.2 % (cellulase enzyme treated) and 86.3 % (pectinase enzyme treated) due to the hydrolysis of hemicellulose. Fourier transform infrared analysis indicated that there are no significant differences in functional groups. Thermogravimetric analysis shows that enzymatic and alkali treatments improve final degradation temperature of the fiber. Mechanical behaviors of cellulase enzyme-treated fiber decrease compared to raw fiber, while pectinase enzyme and alkali treatment cause to improve mechanical properties. Tensile strength of samples was determined as 76.4 MPa (cellulase enzyme treated fiber), 210 MPa (pectinase enzyme treated fiber) and 240 MPa (alkali treated fiber). Young's modules of cellulase enzyme, pectinase enzyme and alkali treated fibers were predicted as 5.5 GPa, 13.1 GPa and 16.6 GPa. Elongation at break of samples was calculated as 5.5 % (cellulase enzyme treated fiber), 6.5 % (pectinase enzyme treated fiber) and 6 % (alkali treated fiber). The results suggest that enzymatic and alkali treatments can modify the functional and structural attributes of Sambucus ebulus L. fiber.

The role of glycosylation in non-productive adsorption of cellulase to lignin isolated from pretreated corn stover.

Glycosylation, a general post-translational modification for fungal cellulase, has been shown to affect cellulase binding to its substrate. However, the exact impact of glycosylation on cellulase-lignin interaction remain unclear. Here, we demonstrated that the lignin isolated from tetrahydrofuran-pretreated corn stover exhibits strong adsorption capability to cellulase due to its negatively charged and porous structure. For the cellulases with varying glycosylation levels, the less-glycosylated protein showed high adsorption capability to lignin, and that trend was observed for the main cellulase components secreted by Penicillium oxilicum, including endoglucanase PoCel5B, cellobiohydrolase PoCel7A-2, and ß-glucosidase PoBgl1. Additionally, N-glycan sites and motifs were examined using mass spectrometry, and protein structures with N-glycans were constructed, where PoBgl1 and PoCel7A-2 contained 13 and 1 glycosylated sites respectively. The results of molecular dynamics simulations indicated that the N-glycans impacted on the solvent-accessible surface area and secondary structure of protein, and the binding conformation of lignin fragment on cellulase, resulting in a decrease in binding energy (14 kcal/mol for PoBgl1 and 13 kcal/mol for PoCel7A-2), particularly for van der Waals and electrostatic interaction. Those findings suggested that glycosylation negatively impacted the lignin-cellulase interaction, providing a theoretical basis for the rational engineering of enzymes to reduce lignin-enzyme interaction.

The first crystal structure of a family 45 glycoside hydrolase from a brown-rot fungus, Gloeophyllum trabeum GtCel45A.

Here we describe the first crystal structure of a beta-1,4-endoglucanase from a brown-rot fungus, Gloeophyllum trabeum GtCel45A, which belongs to subfamily C of glycoside hydrolase family 45 (GH45). GtCel45A is ~ 18 kDa in size and the crystal structure contains 179 amino acids. The structure is refined at 1.30 Å resolution and Rfree 0.18. The enzyme consists of a single catalytic module folded into a six-stranded double-psi beta-barrel domain surrounded by long loops. GtCel45A is very similar in sequence (82% identity) and structure to PcCel45A from the white-rot fungus Phanerochaete chrysosporium. Surprisingly though, initial hydrolysis of barley beta-glucan was almost twice as fast in GtCel45A as compared to PcCel45A.

Insights into the transcriptomic mechanism and characterization of endoglucanases from Aspergillus terreus in cellulose degradation.

Filamentous fungi are the main industrial source of cellulases which are important in the process of converting cellulose to fermentable sugars. In this study, transcriptome analysis was conducted on Aspergillus terreus NEAU-7 cultivated using corn stover and glucose as carbon sources. Four putative endoglucanases (EG5A, EG7A, EG12A, and EG12C) from A. terreus NEAU-7 were efficiently expressed in Pichia pastoris. Among them, EG7A exhibited the highest enzyme activity (75.17 U/mg) with an optimal temperature of 40 °C and pH 5.0. EG5A and EG12A displayed specific activities of 19.92 U/mg and 14.62 U/mg, respectively, at 50 °C. EG12C showed acidophilic characteristics with an optimal pH of 3.0 and a specific activity of 12.21 U/mg at 40 °C. With CMC-Na as the substrate, the Km value of EG5A, EG7A, EG12A or, EG12C was, 11.08 ± 0.87 mg/mL, 6.82 ± 0.74 mg/mL, 7.26 ± 0.64 mg/mL, and 9.88 ± 0.86 mg/mL, with Vmax values of 1258.23 ± 51.62 µmol∙min-1∙mg-1, 842.65 ± 41.53 µmol∙min-1∙mg-1, 499.38 ± 20.42 µmol∙min-1∙mg-1, and 681.41 ± 30.08 µmol∙min-1∙mg-1, respectively. The co-treatment of EG7A with the commercial cellulase increased the yield of reducing sugar by 155.77 % (filter paper) and 130.49 % (corn stover). Molecular docking assay showed the interaction energy of EG7A with cellotetraose at -10.50 kcal/mol, surpassing EG12A (-10.43 kcal/mol), EG12C (-10.28 kcal/mol), and EG5A (-9.00 kcal/mol). Root Mean Square Deviation (RMSD) and Solvent Accessible Surface Area (SASA) values revealed that the presence of cellotetraose stabilized the molecular dynamics simulation of the cellotetraose-protein complex over a 100 ns time scale. This study provides valuable insights for developing recombinant enzymes and biomass degradation technologies.

Enhancement of cellulase production by cellulolytic bacteria SB125 in submerged fermentation medium and biochemical characterization of the enzyme.

Microbial diversity from indigenous cultures has the potential to accelerate lignocellulose degradation through enzymes and make composting economically feasible. Therefore, this study is designed to boost cellulase output from a bacterial strain obtained from soil using a one-variable-at-a-time approach and response surface methodology. The bacteria recognized as Bacillus tequilensis (ON754229) produced the maximum cellulase at a temperature of 37 °C, pH -7.0, and incubation time of 72 h. A major contribution was anticipated by glucose (17 %) and ammonium sulfate (11 %) with cellulase activity of 0.56 U/mL in the optimized medium. The enzyme possessed activity of CMCase, FPase, and amylase of 0.589 µmol/min, 1.22 µmol/min, and 0.92 µmol/min respectively. SDS-PAGE showed a 65 kDa molecular weight of the enzyme capable of degrading cellulose, as confirmed by zymogram analysis. The enzyme showed relatively moderate thermo-stability towards neutral pH conditions possessing optimum conditions at pH 6.5 and temperature of 50 °C. The Km and Vmax values were 11.44 mM and 0.643 µmol/min respectively. The presence of MgSO4, ZnSO4, and Triton X- 100 increased the enzymatic reaction however AgNO3, EDTA, and HgCl2 altered the activation process. These results showed cellulase from B. tequilensis SB125 would be suitable for conventional industrial processes that convert biomass into biofuels.

Glycosylation of cellulase: a novel strategy for improving cellulase.

Protein glycosylation is the most complex posttranslational modification process. Most cellulases from filamentous fungi contain N-glycosylation and O-glycosylation. Here, we discuss the potential roles of glycosylation on the characteristics and function of cellulases. The use of certain cultivation, inducer, and alteration of engineering glycosylation pathway can enable the rational control of cellulase glycosylation. Glycosylation does not occur arbitrarily and may tend to modify the 3D structure of cellulases by using specially distributed glycans. Therefore, glycoengineering should be considered comprehensively along with the spatial structure of cellulases. Cellulase glycosylation may be an evolution phenomenon, which has been considered as an economical way for providing different functions from identical proteins. In addition to gene and transcription regulations, glycosylation may be another regulation on the protein expression level. Enhanced understanding of the potential regulatory role of cellulase glycosylation will enable synthetic biology approaches for the development of commercial cellulase.

Optimization of enzymatic saccharification of industrial wastes using a thermostable and halotolerant endoglucanase through Box-Behnken experimental design.

This study describes the production, characterization and application of an endoglucanase from Penicillium roqueforti using lignocellulosic agro-industrial wastes as the substrate during solid-state fermentation. The endoglucanase was generated after culturing with different agro-industrial wastes for 96 h without any pretreatment. The highest activity was obtained at 50 °C and pH 4.0. Additionally, the enzyme showed stability in the temperature and pH ranges of 40-80 °C and 4.0-5.0, respectively. The addition of Ca2+, Zn2+, Mg2+, and Cu2+ increased enzymatic activity. Halotolerance as a characteristic of the enzyme was confirmed when its activity increased by 35% on addition of 2 M NaCl. The endoglucanase saccharified sugarcane bagasse, coconut shell, wheat bran, cocoa fruit shell, and cocoa seed husk. The Box-Behnken design was employed to optimize fermentable sugar production by evaluating the following parameters: time, substrate, and enzyme concentration. Under ideal conditions, 253.19 mg/g of fermentable sugars were obtained following the saccharification of wheat bran, which is 41.5 times higher than that obtained without optimizing. This study presents a thermostable, halotolerant endoglucanase that is resistant to metal ions and organic solvents with the potential to be applied in producing fermentable sugars for manufacturing biofuels from agro-industrial wastes.

A critical process variable-regulated, parameter-balancing auxostat, performed using disposed COVID-19 personal protective equipment-based substrate mixture, yields sustained and improved endoglucanase titers.

Fifty percent of the overall operational expenses of biorefineries are incurred during enzymatic-saccharification processes. Cellulases have a global-market value of $1621 USD. Dearth of conventional lignocelluloses have led to the exploration of their waste stream-based, unconventional sources. Native fungus-employing cellulase-production batches fail to yield sustained enzyme titers. It could be attributed to variations in the enzyme-production broth's quasi-dilatant behavior, its fluid and flow properties; heat and oxygen transfer regimes; kinetics of fungal growth; and nutrient utilization. The current investigation presents one of the first-time usages of a substrate mixture, majorly comprising disposed COVID-19 personal protective-equipment (PPE). To devise a sustainable and scalable cellulase-production process, various variable-regulated, continuous-culture auxostats were performed. The glucose concentration-maintaining auxostat recorded consistent endoglucanase titers throughout its feeding-cum-harvest cycles; furthermore, it enhanced oxygen transfer, heat transfer co-efficient, and mass transfer co-efficient by 91.5, 36, and 77%, respectively. Substrate-characterization revealed that an unintended, autoclave-based organsolv pretreatment caused unanticipated increases in endoglucanase titers. The cumulative lab-scale cellulase-production cost was found to be $16.3. The proposed approach is economical, and it offers a pollution-free waste management process, thereby generating carbon credits.

The crystal structure of RsSymEG1 reveals a unique form of smaller GH7 endoglucanases alongside GH7 cellobiohydrolases in protist symbionts of termites.

Glycoside hydrolase family 7 (GH7) cellulases are key enzymes responsible for carbon cycling on earth through their role in cellulose degradation and constitute highly important industrial enzymes as well. Although these enzymes are found in a wide variety of evolutionarily distant organisms across eukaryotes, they exhibit remarkably conserved features within two groups: exo-acting cellobiohydrolases and endoglucanases. However, recently reports have emerged of a separate clade of GH7 endoglucanases from protist symbionts of termites that are 60-80 amino acids shorter. In this work, we describe the first crystal structure of a short GH7 endoglucanase, RsSymEG1, from a symbiont of the lower termite Reticulitermes speratus. A more open flat surface and shorter loops around the non-reducing end of the cellulose-binding cleft indicate enhanced access to cellulose chains on the surface of cellulose microfibrils. Additionally, when comparing activities on polysaccharides to a typical fungal GH7 endoglucanase (Trichoderma longibrachiatum Cel7B), RsSymEG1 showed significantly faster initial hydrolytic activity. We also examine the prevalence and diversity of GH7 enzymes that the symbionts provide to the termite host, compare overall structures and substrate binding between cellobiohydrolase and long and short endoglucanase, and highlight the presence of similar short GH7s in other organisms.

Sustainable structural polysaccharides conversion: How does DES pretreatment affect cellulase adsorption, thereby improving enzymatic digestion of lignocellulose?

Biomass conversion aims at degrading the structural polysaccharides of lignocellulose into reducing sugars. Pretreatment is necessary to overcome the recalcitrance of lignocellulose. The DES La/ChCl in this paper was selected based on our previous study. To examine cellulase adsorption of lignocellulose after DES pretreatment, sorghum straw was pretreated with DES under different condition. The adsorption improvement of cellulase on lignocellulose after DES pretreatment has positive impact on reducing sugar production of biomass. After DES pretreatment, 1. pore corrosion caused the upward trend of pore radius and the downward trend of SSA. 2. the hydrogen bounding force of pretreated sorghum straw and MCC decreased, the hydrogen bounding force of pretreated lignin increased. 3. although the unsaturation of pretreated lignin increased, DES pretreatment is helpful for the removal of lignin. 4. The decrease in the hydrophobicity of sorghum straw make it easier to disperse. 5. the Zeta potential of pretreated sorghum straw shifted towards the positively charged region, while pretreated lignin shifted towards the negatively charged region. 6. different adsorption behaviors were observed in specific components of cellulase mixtures (BGs, CBHs, EGs and xlylanase). These results revealing the mechanism of enzyme adsorption are conductive for understanding the role of pretreatment in biomass conversion.

Enzymatic and biophysical characterization of a novel modular cellulosomal GH5 endoglucanase multifunctional from the anaerobic gut fungus Piromyces finnis.

Cellulases from anaerobic fungi are enzymes less-studied biochemically and structurally than cellulases from bacteria and aerobic fungi. Currently, only thirteen GH5 cellulases from anaerobic fungi were biochemically characterized and two crystal structures were reported. In this context, here, we report the functional and biophysical characterization of a novel multi-modular cellulosomal GH5 endoglucanase from the anaerobic gut fungus Piromyces finnis (named here PfGH5). Multiple sequences alignments indicate that PfGH5 is composed of a GH5 catalytic domain and a CBM1 carbohydrate-binding module connected through a CBM10 dockerin module. Our results showed that PfGH5 is an endoglucanase from anaerobic fungus with a large spectrum of activity. PfGH5 exhibited preference for hydrolysis of oat ß-glucan, followed by galactomannan, carboxymethyl cellulose, mannan, lichenan and barley ß-glucan, therefore displaying multi-functionality. For oat ß-glucan, PfGH5 reaches its optimum enzymatic activity at 40 °C and pH 5.5, with Km of 7.1 µM. Ion exchange chromatography analyzes revealed the production of oligosaccharides with a wide degree of polymerization indicated that PfGH5 has endoglucanase activity. The ability to bind and cleave different types of carbohydrates evidence the potential of PfGH5 for use in biotechnology and provide a useful basis for future investigation and application of new anaerobic fungi enzymes.

Efficient Fast Fractionation of Biomass Using a Diol-Based Deep Eutectic Solvent for Facilitating Enzymatic Hydrolysis and Obtaining High-Quality Lignin.

Current DES pretreatment is often performed under relatively severe conditions with high temperature, long time, and high DES usage. This work studied a short-time diol DES (deep eutectic solvent) pretreatment under mild conditions to fractionate the bamboo, facilitate enzymatic hydrolysis, and obtain high-quality lignin. At an optimized condition of 130 °C for only 10 min, lignin and xylan removal reached 61.34 % and 84.15 %, with residual glucan showing a ~90 % enzymatic hydrolysis yield. Equally important, the dissolved lignin could be readily recovered with 97.51 % yield, exhibiting 96.65 % ß-O-4 preservation. The fractionation and lignin protection mechanisms were unveiled by XRD, FTIR, cellulose-DP, 2D HSQC NMR, 31P NMR and GPC analysis. This study highlighted that short-time fractionation of bamboo can be achieved by a diol-based DES which is an ideal strategy to upgrade the lignocellulose biomass for high enzymatic hydrolysis yields and high-quality lignin stream.

Effects of Alkaline Hydrogen Peroxide and Cellulase Modifications on the Physicochemical and Functional Properties of Forsythia suspensa Dietary Fiber.

Besides active substances, Forsythia suspensa is rich in dietary fiber (DF), but it is often wasted or discarded and not put to good use. In order to improve the function of Forsythia DF, it was modified using alkaline hydrogen peroxide (AHP) and cellulase (EM). Compared to the control DF (ODF), the DF modified using AHP (AHDF) and EM (EMDF) had a looser microstructure, lower crystallinity, and higher oil holding capacity (OHC) and cation exchange capacity (CEC). The AHP treatment significantly increased the water holding capacity (WHC) and water swelling ability (WSA) of the DF, while the EM treatment achieved just the opposite. Moreover, the functional properties of AHDF and EMDF, including their cholesterol adsorption capacity (CAC), nitrite ion adsorption capacity (NAC), glucose adsorption capacity (GAC), glucose dialysis retardation index (GDRI), α-amylase inhibitory activity, and DPPH radical scavenging activity, were far better than those of ODF. Together, the results revealed that AHP and EM modifications could effectively improve or enhance the physicochemical and functional properties of Forsythia suspensa DF.

Addressing two major limitations in high-solids enzymatic hydrolysis by an ordered polyethylene glycol pre-incubated strategy: Rheological properties and lignin adsorption for enzyme.

High-solids enzymatic hydrolysis for biomass has currently received considerable interest. However, the solid effect during the process limits its economic feasibility. This work presented an ordered polyethylene glycol (PEG) pre-incubated strategy for enhancing the auxiliary effect of PEG in a high-solids enzymatic hydrolysis system. The substrate and enzyme were separately pre-incubated with PEG in this strategy. The ordered PEG pre-incubated strategies yielded a maximum glucose concentration of 166.6 g/L from 32 % (w/v) pretreated corncob with an enzymatic yield of 94.1 % by 72 h hydrolysis. Using this method, PEG not only lessened the lignin adsorption to cellulase but also altered particle rheological characteristics in the high-solids enzymatic hydrolysis system as a viscosity modifier. This study offered a new insight into the mechanism behind the PEG synergistic effect and would make it possible to achieve efficient high-solids loading hydrolysis in the commercial manufacture of cellulosic ethanol.